Configuring the HP StorageWorks Modular Smart Array 1000 and 1500cs for External Boot with Novell NetWare - New Installations - Technical Note (October 2006)

Configuring the MSA1000/MSA1500cs for External Boot - NetWare 30
14. Once Continue has been press, you will see a screen like the one below, where the
Operating System is loading the drivers.
15. The installation will now continue normally. Depending on the hardware installed, you
may or may not need to load additional drivers for Network adapters, etc. For this
demonstration, it is assumed that no other drivers need to be loaded.