HP StorageWorks 60 Modular Smart Array Enclosure User Guide

Setup 19
If you are installing the storage enclosure into a telco rack, order the appropriate option kit at the
RackSolutions website (http://www.racksolutions.com/hp
). Follow the storage enclosure-specific
instructions on the website to install the rack brackets.
Use the following information when connecting peripheral cables and power cords to the storage
enclosure.
Item Description
1 Power supply 1
2 Fan module 1
3 Dual 7-segment display board (for box ID numbering)
4 SAS in connector
5 SAS out connector
6 I/O module bay
7 For future use
8 Fan module 2
9 Power supply 2
Installing hardware options
Install any hardware options before initializing the storage enclosure. For options installation information,
refer to the option documentation. For storage enclosure-specific information, refer to "Hardware Options
Installation (on page 23)."
Installing servers
Install the servers in the rack directly above the storage enclosure. Refer to the server documentation.
NOTE: When installing servers, HP recommends installing all storage enclosures at the bottom of the rack.
To optimize cabling access, avoid interleaving the storage enclosure and server products.