HP 60/70 Modular Smart Array Enclosure Firmware 2.
© Copyright 2009, 2011 Hewlett-Packard Development Company, L.P.
Firmware version: 2.28 * In controller-enclosure connect environments, 2.28 is supported for use only when an MSA70 is connected to MSA2000 G2 or P2000 G3 arrays running approved companion firmware versions. For more information, see “Controller enclosures, controller firmware, and MSA70 firmware versions” (page 3). nl Description This firmware package delivers firmware for HP MSA60/70 drive enclosures.
Operating systems 4 • HP-UX 11i V3 • HP-UX 11i V2 • Microsoft Win PE • Web Edition: ◦ Embedded Systems Edition ◦ Standard Edition and Standard x64 Edition ◦ Enterprise Edition and Enterprise x64 Edition ◦ Datacenter Edition and Datacenter x64 Edition (non-program Datacenter) ◦ Compute Cluster Server 2003 (CCS 2003) • Windows Server 2003: 2003 SP2 and later • Windows 2008: ◦ Web Server ◦ Small Business ◦ Embedded Systems Edition ◦ Standard Edition and Standard x64 Edition ◦ Ent
Fixes • Implemented a Single Cycle Hold Detection (SCHD) fix for SATA drives. • Fixed an intermittent issue which resulted in MSA60/70 enclosures sending a BREAK primitive (sometimes referred to as a “SAS Link Broken” issue) to SmartArray and MSA array controllers. • Fixed issues which resulted in a hung I/O module with blinking amber LEDs. • Fixed an intermittent issue which resulted in MSA60/70 enclosures sending broadcast messages to the initiator, causing a temporary performance reduction.
Installation instructions for server-connect environments Firmware updates in supported server-connect environments can be performed only in an offline mode using the HP ProLiant Firmware Maintenance CD (recently renamed the HP Smart Update Firmware DVD), version 8.50 or greater. 1. 2. Download the Firmware Maintenance CD image and create a bootable CD or USB Key (using the HP USB Key utility) from the HP Support and Drivers download page (http://www.hp.com/ support.
Installation instructions for controller enclosure connect environments Follow instructions in this section to update firmware when the MSA70 drive enclosure is connected to a controller enclosure, which in turn is connected to a server or network.
Smart Component installation instructions for Linux environments 1. 2. 3. 4. Place the Smart Component in a temporary directory. Open a Linux command console. From the directory containing the downloaded file, enable execute access to this model by typing chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file. Execute the Smart Component by entering a command similar to the following: ./CPxxxxxx.