HP StorageWorks 60/70 Modular Smart Array Enclosure Firmware v2.28 Release Notes (536920-006, May 2011)

Firmware version:

2.28

* In controller-enclosure connect environments, 2.28 is supported for use only when an MSA70 is

connected to MSA2000 G2 or P2000 G3 arrays running approved companion firmware versions.

For more information, see “Controller enclosures, controller firmware, and MSA70 firmware versions”

(page 3).

Description

This firmware package delivers firmware for HP MSA60/70 drive enclosures.

Update recommendation

Update recommendationConnection environment

RecommendedServer connect

Varies, depending on array controller enclosure model and installed controller enclosure

firmware. For more information about supported companion firmware versions for array

controller enclosures and drive enclosures, see “Controller enclosures, controller

firmware, and MSA70 firmware versions” (page 3).

Controller enclosure connect

Supersedes

2.18

Product models

HP 60 Modular Smart Array drive enclosure (MSA60)

HP 70 Modular Smart Array drive enclosure (MSA70)

Controller enclosures, controller firmware, and MSA70 firmware versions

The following table lists supported controller enclosure models and required companion firmware

versions for when an MSA70 is deployed in a controller-enclosure connect environment.

MSA70 firmware versionController firmware versionController enclosure model

2.28TS230 and later

P2000 G3 MSA

2.18TS220, TS210, TS201, TS200 and earlier

2.28M112 and later

MSA2000 G2

2.18M111 and earlier

2.18AllMSA2000

Description 3