HP StorageWorks U320e SCSI Host Bus Adapter user guide (AH627-96001, March 2007)

b. Use a sm all, flat screwdriver to remove the four stand-offs on the external connectors, as
shown in Figure 3.
11315
Figure 3 Removing t he stand-offs
c. Remove the bracket and replace it with the low-profile bracket. Verify that the new bracket
is oriented c orrectly, as shown in Figure 4.
11316
Figure 4 Card with low-profile bracket
d. Replace the four stand-offs to secure the bracket to the b oard.
e. Attach the two screws to the high-profile bracket in case you need the larger b racket to install
the adapter in another server.
Preparing the ser ver
To prepare the server for the new adapter:
1. Back up all data.
2. Perform
anormalsystemshutdown.
3. Power down the server.
4. Power down all peripheral devices that are connected to the server.
5. Unplug
the ser ver’s AC power cords from the power outlet a nd then from the server.
6. Discon
nect all peripheral devices from the server.
16
Installation