HP StorageWorks MSL2024 Tape Library getting started guide (AH559-96001, March 2007)

CAUTION! Operating the Tape Library on a flat
surface without the tabletop conversion cover may
cause errors or damage to the Library.
The MSL2024 Tape Library can either be installed
into a rack with the enclosed rails or installed into
the optional tabletop conversion cover and set on a
flat surface.
Optional tabletop conversion cover
17
2 46 6 7
53
1
2 2 8
3
9 4
5
6
79
Front panel overview
Back panel overview: parallel SCSI
1Power button
2 Mailslot
3 LEDs
4 LCD screen
5 Control keys
6 Air vents
7 Magazines
1 68-pin parallel SCSI
connectors
2Fan
3 Power connector
4 Tape drive
5 Ethernet port
6 Serial port (HP factory
use only)
7USBport
8 Pull-out tab containing
product information
9 Magazine release hole
One full-height Ultrium parallel SCSI tape drive
1
2 99 82 43
65
7
One half-height Ultrium 448 parallel SCSItape drive
NOTE: The Back panel overview shows sample
configurations. Your Library may look different
from these illustrations.
Back panel overview: Fibre Channel
1 Fibre Channel Ports A
and B, left to right
2Fan
3 Power connector
4 Tape drive
5 Ethernet port
6 Serial port (HP factory
use only)
7USBport
8 Pull-out tab containing
product information
9 Magazine release hole
2 2
4 8
5
3 9 9
1
7
6
One full-height Ultrium Fibre Channel tape drive
Back panel overview: SAS
1SASport
2Fan
3 Power connector
4 Tape drive
5 Ethernet port
6 Serial port (HP factory
use only)
7USBport
8 Pull-out tab containing
product information
9 Magazine release hole
2
5
3
78 9
21
6
4
9
One half-height Ultrium SAS tape drive