MSL6480 Getting Started Guide (rev 3) (QU625-96331, April 2014)

4. Repeat steps 1 through 3 for each of the other magazines.
Verifying the installation
Verify that the library has the current firmware revision. The library firmware revision is displayed
in the top left corner of the OCP and RMI screen.
If necessary, update the library firmware from the OCP or RMI Maintenance > Software Upgrades
> System Firmware screen.
After configuring the library, you can save the configuration settings to a USB flash drive from the
OCP or to a file on your computer from the RMI Configuration > Save/Restore screen. Having a
backup of the library configuration is helpful when recovering from a configuration error or if the
library needs service.
Configuring additional features
The library has many features to customize it for your organization.
• Enabling the mailslot.
• Configuring partitioning and additional library parameters using one of the partitioning
wizards.
◦ Basic Partition Wizard — Use the Basic Partition Wizard to configure partitions that will
have similar resources or to configure the number of barcode characters to report to the
host application and whether to report them from the left or right end of the label for a
library with a single partition.
◦ Expert Partition Wizard — Use the Expert Partition Wizard to configure partitions that
will have different resources or to adjust resource assignments for existing partitions or
those created with the Basic Partition Wizard.
• Modifying the default tape drive settings.
• Enabling and configuring SNMP network management.
• Enabling and configuring Command View TL integration.
• Setting up email event notification.
• Using the HP StoreEver 1/8 G2 and MSL Encryption Kit.
For configuration procedures and troubleshooting information, see the HP StoreEver MSL6480
Tape Library User and Service Guide.
28 Installing the library