HP 1/8 G2 and MSL Encryption Kit User Guide

Figure 8 RMI Configuration > Security tab
You can download autoloader or library firmware files from the HP Support website at http >//
www.hp.com/support.
Locate the USB port
Locate the USB port on the back panel of the autoloader or library.
Figure 9 MSL6480 rear USB port location
NOTE: Only the rear USB port on the MSL6480 is used for the encryption kit token. The front
port cannot be used for the token.
Figure 10 Autoloader and other library USB port location
If the USB port is covered with silver tape, remove the tape.
Preparing the key server tokens
As part of your security process, you will need to track each key server token, along with information
associated with the token, as required by your security policy. If you do not have a security policy
that specifies this information see “Creating your key management processes” (page 14) for
Preparing the key server tokens 19