HP StoreEver MSL Tape Libraries Encryption Key Server Configuration Guide

If you generated a new certificate, you must sign the new certificate in the Sign Library
Certificate screen. Follow the instructions on the screen to sign the certificate in the ESKM web
interface and then paste it into the ESKM Certificate pane. After pasting the signed certificate,
click Next.
8. The ESKM Information screen displays prerequisites for using the ESKM. When the pre-requisites
have been met, click Next.
9. In the ESKM Tier Selection screen you can group ESKM devices into tiers so the library will
attempt to connect with ESKM devices in the top tier first, and then failover to connect with
ESKM devices in a lower priority tier if necessary. For example, you might put ESKM devices
in the same data center as the library in Tier 1 with ESKM devices in remote data centers in
Tiers 2 and 3.
One tier is used by default. To add a tier, click Add Tier.
Enter the IP address or fully-qualified hostname and port number for up to six ESKM devices
in each tier. To verify access to the ESKM devices, click Connectivity Check.
When the tier configuration is complete, click Next.
10 HP Enterprise Secure Key Manager (ESKM) integration