MSL2024 and MSL4048 Tape Libraries - Addendum (AH169-96002, November 2006)

10929
Configuration Operations Support
Power On/Off Drives
Info
Requires Admin Password
Requires Service Password
HOME
Status
Identity
Inventory
Network
Open Mailslot(s)Library
Clean Drive
Run Tests
View Logs
Force Drive Eject
Reboot
HP Service
FW Upgrade
Move Media
Inventory
Enable
Password Locks
Drives
Network
Barcode Reporting
Set Admin Password
Restore Defaults
Set Date and Time
Display Contrast
Unlock
Left Magazines
Unlock
Right Magazines
Support Ticket
Figure 5 MSL4048 OCP menu tree
Error code table
This sec
tion contains add itional troubleshooting help for common error codes. See the Troubleshooting
table in
the User and service guide for additional err or codes.
Table 2
Error c
ode
Descrip
tion
Troubl
eshooting steps
89
Gripper (the part of the robotics
assembly that pinches the tape
cartridge to grip it) obstructed.
• Run the wellness test.
• Ensure that nothing is obstructing the g ripper.
• IftheTapeLibrarywasmoved,verifythateachofthe
tape car tridges is properly seated in the magazine.
8A
Slider (the part of the robotics
assembly that reaches in a nd out)
obstructed.
• Run the wellness test.
• If this error occurs with sub-code 43, the magazine
couldbemisaligned.Removethemagazine,re-seat
it, and try a gain.
• Verify that nothing is obstructing the robot.
8C
Ro
tation (the part of the robotics
as
sembly that turns the robot to
fa
ce each magazine and the
d
rive) obstructed.
• R
un the wellness test.
• E
nsure that there is nothing obstructing the gripper.
• I
f the Tape Librar y was moved, verify that each of
the tape cartridges is properly seated in a magazine
or drive.
6