MSL5000 and 6000 Series Tape Libraries User Guide

Operation
105HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
SDLT and DLT Labels
SDLT and DLT tape cartridges have a front slide slot located on the face of the
cartridge next to the write-protect switch (see Figure 63 shows) Use this slot for
inserting the bar code label by sliding it into the slot.
Caution: Do not apply labels onto the top, bottom, sides, or back of the
cartridge as this may cause damage to the tape drive, or interfere with reliable
operation.
Figure 63: Attaching a bar code label to an SDLT/DLT tape cartridge