MSL5000 and 6000 Series Tape Libraries User Guide

Troubleshooting
168 HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
F003 Flash program sector failed
(One of the flash memory sectors could not
be erased.)
■ Press the Enter button to clear the
message.
F004 Bad flash CRC
(The firmware image programmed into
flash memory has a bad CRC and is
probably corrupted.)
■ Press the Enter button to clear the
message.
■ Make sure the firmware file is complete
and correct. If having difficulty uploading
firmware via FTP, telnet, the web
management interface, or TSMC, try
using HP StorageWorks Library and Tape
Tools (see page 175).
F005 Flash exit error
(Internal flash task error.)
■ Press the Enter button to clear the
message.
F006 Incompatible image
(The uploaded firmware image is not
compatible with the library hardware, and
is possibly an older firmware version.)
■ Press the Enter button to clear the
message.
■ Make sure the firmware file is complete
and correct. If having difficulty uploading
firmware via FTP, telnet, the web
management interface, or TSMC, try
using HP StorageWorks Library and Tape
Tools (see page 175).
F402 Buffer allocation failed
(The flash task could not allocate a buffer
area to hold the firmware image to be
uploaded.)
■ Press the Enter button to clear the
message.
Table 11: Fault Symptom Codes (Continued)
FSC Message ERP