MSL5000 and 6000 Series Tape Libraries User Guide

Operation
85HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
SCSI Options
Selecting this option lets you view the settings defined from the SCSI option in
the Edit Options area (see Figure 47).
Note: You can move to the next sequential SCSI Options screen by selecting the ▼. To
return to the previous SCSI Options screen, select the ▲ or Back button to return to the
Menu screen.
Barcode Label Assignment Lets you specify the alignment of a bar code label. The options
are Left or Right. When used in conjunction with the Barcode
Label Size option, this option strips unwanted trailing characters
(left alignment) or leading characters (right alignment). The
default is Left Align.
Barcode Label Check Digit Lets you specify whether to enable or disable the verification of a
check digit character in the bar code label. The default is
Disabled.
Barcode Reader Lets you enable or disable the bar code reader retries option.
The default is Retries Enabled.
Module Configuration Lets you configure a library for Standalone, Master, or Slave
operation. The default is Standalone.
Library Auto Power-On Mode Lets you enable or disable an automatic library power-on after a
power loss without the need to touch the GUI screen. The default
is Enabled.
Table 6: View Library Options (Continued)
Option Description