MSL5000 and 6000 Series Tape Libraries User Guide

Operation
97HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Diagnostics
Selecting this option lets you perform a system calibration on available
components (see Figure 56). Available options are dependent on the specified user
level.
The Diagnostics menu options are described in Chapter 7, “Troubleshooting”
beginning on page 137.
Figure 56: Diagnostics screen (four-drive model shown)
Note: The Vertical Calibration button is only available on four-drive models.
Factory
The Factory menu options are intended for use by factory personnel only.
Caution: Unauthorized use of the Factory option could render the library
inoperable.