HP StorageWorks MSL8096 Tape Library firmware release notes Firmware version 9.
Legal and notice information © Copyright 2009 Hewlett-Packard Development Company, L.P.
Version: 9.20 Description This release includes updated firmware for the HP StorageWorks MSL8096 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Library firmware version 9.20 Compatible robotics firmware version Update recommendation Supersedes 2.70e Recommended All previous versions of Library firmware.
was displayed. This issue was introduced by firmware version 9.10 and is corrected by version 9.20. • Fixed a case where System Error D7 23 could be returned during a drive firmware upgrade when the final package from the download file was not a full package. • Fixed a case where loading a tape cartridge into the Library resulted in an error message when the Library did not fully insert the cartridge in the tape drive. In version 9.10, an F4 98 Drive Load Timeout error was reported.
2. Insert the USB flash drive into the USB port on the back of the Library. 3. From the Support menu, select FW Upgrade > By USB. 4. Select the Library as the target for the upgrade, and select the filename of the firmware. 5. Click Upgrade. 6. When the upgrade is complete, remove the USB flash drive from the USB port. Determining current version To find the version of firmware installed on the Library, see the RMI Support: Firmware screen or the OCP Info > Library Identity option.
