HP StorageWorks MSL8096 Tape Library firmware release notes Firmware version 9.10 (AK382-96008, December 2008)

HP StorageWorks MSL8096 Tape

Library firmware release notes

Firmware version 9.10

Part number: AK382-96008

First edition: December 16, 2008

PAGE 1
HP StorageWorks MSL8096 Tape Library firmware release notes Firmware version 9.
PAGE 3
Version: 9.10 Description This release includes updated firmware for the HP StorageWorks MSL8096 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP). • HP Library and Tape Tools (L&TT). Library firmware version • 9.10 Update recommendation Supersedes Recommended All previous versions of Library firmware.
PAGE 4
• Fixed a case where some pieces of tape media were marked as Invalid Cartridge after a Load/Unload Timeout error. • Fixed a case where the OCP could become unresponsive after closing the mailslot. • Fixed a case where the mailslot opened unintentionally during a move operation to the front storage slot on the right side magazine. • Added a check for the case that both the Library robotic and library controller were replaced at the same time.
PAGE 5
3. In the Support: Firmware page, browse to the location of the Library firmware file. 4. Click Update. To upgrade firmware from the OCP using a USB flash drive: 1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.com/support/storage. Copy the firmware onto the USB flash drive. 2. Insert the USB flash drive into the USB port on the back of the Library. 3. From the Support menu, select FW Upgrade > By USB. 4.
PAGE 6