HP MSR1000 Router Series Installation Guide

23
Powering on the router
1. Turn on the switch of the power supply system for the router.
2. Turn on the switch of the AC or DC power modules.
Displaying boot information
Power on the router, and you can see the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...................................
Done!
****************************************************************************
* *
* HP MSR1003 BootWare, Version 1.03 *
* *
****************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
Compiled Date : Aug 22 2013
CPU ID : 0x8
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
Memory Type : DDR3 SDRAM
Memory Size : 256MB
Memory Speed : 667MHz
Flash Size : 128MB
CPLD Version : 1.0
PCB Version : 2.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/icg3000-cmw520-e2509.bin!.
............................................................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
.................Done!
System application is starting..................................................
....................................................
User interface aux0 is available.
Press Enter, and the following prompt appears:
<sysname>
You can now configure the router.