HP MSR1000 Router Series Installation Guide
Table Of Contents
- Title Page
- Contents
- Preparing for installation
- Installing the router
- Replacement procedure
- Troubleshooting
- Appendix A Chassis views and technical specifications
- Appendix B LEDs
- Appendix C Slot arrangement
- Support and other resources
- Index
24
Examining the router after power-on
After the router is powered on, verify that:
• The LEDs on the front panel are operating correctly:
LED
Status
Descri
p
tion
PWR Steady green The power module is supplying power correctly.
SYS Slow flashing green The router is operating correctly.
• The configuration terminal displays information correctly. For local configuration, the configuration
terminal displays the boot information (see "Displaying boot information")
.
• If you press Enter as prompted after system bootup, the router is ready to configure.
Configuring basic settings for the router
After the router is powered on for the first time, configure the basic settings for the router. For more
information, see HP MSR Routers Fundamentals Configuration Guide (V5) and HP MSR Routers
Fundamentals Command Reference (V5).