R2511-About the HP MSR Router Series Configuration Guides(V5)

1
About the HP MSR series configuration guides
The HP MSR series configuration guides describe the software features for the HP MSR Series Routers,
and guide you through the software configuration procedures. These configuration guides also provide
configuration examples to help you apply the software features to different network scenarios.
Confi
g
uration
g
uide Content
Fundamentals Configuration
Guide
Describes how to use the command line interface of the router, log in to and
set up the router, and use the basic management functions. This guide
includes:
• CLI (command line interface overview and how to use the CLI)
• Login Management
• Device Management
• Configuration file management
• File System Management
• FTP and TFTP
• License Management
• Software upgrade
• Automatic Configuration
Interface Configuration Guide
Covers the configuration of various interfaces. This guide includes:
• Ethernet interface
• WAN interfaces
• ATM and DSL Interfaces
• POS interface
• CPOS interface
• Loopback and null interfaces
Layer 2—LAN Switching
Configuration Guide
Covers Layer 2 technologies and features used on a LAN switched network,
such as VLAN technology, port isolation, MSTP. You can use these features
to divide broadcast domains, remove Layer 2 loops, isolate users within a
VLAN, re-mark VLAN tags, implement VLAN VPNs over the Internet, and so
on. This guide includes:
• MAC Address Table
• VLAN
• Spanning Tree
• Ethernet Link Aggregation
• GVRP
• LLDP
• Port Isolation
• VLAN Termination
Layer 2—WAN Access
Configuration Guide
Covers WAN access technologies. This guide includes:
• SLIP
• PPP(PPP and MP, PPPoE)
• ISDN
• Frame Relay(Frame Relay, Frame Relay Compression, Multilink Frame
Relay, PPPoFR, MPoFR)