R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

115
Examples
# Set the number of QoS tokens to 1.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] qos qmtoken 1
[Sysname-Serial2/0] shutdown
[Sysname-Serial2/0] undo shutdown
Packet information pre-extraction commands
qos pre-classify
Use qos pre-classify to enable packet information pre-extraction on the tunnel interface.
Use undo qos pre-classify to disable packet information pre-extraction on the tunnel interface.
Syntax
qos pre-classify
undo qos pre-classify
Default
Packet information pre-extraction is disabled on a tunnel interface.
Views
Tunnel interface view
Default command level
2: System level
Examples
# Enable packet information pre-extraction on tunnel interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] qos pre-classify
Local fragment pre-drop commands
qos fragment pre-drop
Use qos fragment pre-drop to enable local fragment pre-drop on the interface.
Use undo qos fragment pre-drop to disable local fragment pre-drop on the interface.
Syntax
qos fragment pre-drop
undo qos fragment pre-drop
Default
Local fragment pre-drop is disabled on interfaces.