R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

7
Parameters
text: ACL description, a case-sensitive string of 1 to 127 characters.
Usage guidelines
The MPU-G2 of an MSR50 router and the MSR93X router do not support WLAN ACL view.
Examples
# Configure a description for IPv4 basic ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] description This is an IPv4 basic ACL.
# Configure a description for IPv6 basic ACL 2000.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] description This is an IPv6 basic ACL.
Related commands
• display acl
• display acl ipv6
display acl
Use display acl to display configuration and match statistics for WLAN, IPv4 basic, IPv4 advanced,
Ethernet frame header, and user-defined ACLs.
Syntax
display acl { acl-number | all | name acl-name } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
acl-number: Specifies an ACL by its number:
• 100 to 199 for WLAN ACLs
• 2000 to 2999 for IPv4 basic ACLs
• 3000 to 3999 for IPv4 advanced ACLs
• 4000 to 4999 for Ethernet frame header ACLs
• 5000 to 5999 for user-defined ACLs
The following matrix shows the ACL number ranges and hardware compatibility:
Hardware Number ran
g
es for ac
l
-numbe
r
MSR900 All ranges.
MSR93X All ranges except WLAN ACLs.
MSR20-1X All ranges.