R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

141
<Sysname> system-view
[Sysname] traffic classifier rtp-class2
[Sysname-classifier-rtp-class2] if-match protocol rtp payload-type 0 1 4 5 6 10 64
protocol
Use protocol to add the specified protocol to the current protocol group.
Use undo protocol to delete the specified protocol from the protocol group.
Syntax
protocol protocol-name
undo protocol protocol-name
Default
No protocol exists in a protocol group.
Views
Protocol group view
Default command level
2: System level
Parameters
protocol-name: Protocol name, a string of 1 to 31 characters.
Usage guidelines
Only the protocols included in the signature file can be added to a protocol group. If an existing protocol
in the protocol group is not included in the signature file to be loaded, the protocol is removed from the
protocol group automatically when the new signature file is loaded.
Examples
# Add protocol MSN to protocol group 1.
<Sysname> system-view
[Sysname] dar protocol-group 1
[Sysname-protocol-group-1] protocol msn
reset dar protocol-statistic
Use reset dar protocol-statistic to clear the DAR protocol statistics.
Syntax
reset dar protocol-statistic { { { p2p | protocol protocol-name } | interface interface-type
interface-number } * | all }
Views
User view
Default command level
1: Monitor level
Parameters
p2p: Clears P2P traffic statistics.