R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

9
Field Descri
p
tion
named flow
The name of the ACL is flow. "-none-" means the ACL is not
named.
This field is not present for a WLAN ACL.
3 rules The ACL contains three rules.
match-order is auto
The match order for the ACL is auto, which sorts ACL rules in
depth-first order. This field is not present when the match order
is config.
This is an IPv4 basic ACL. Description of the ACL.
ACL's step is 5 The rule numbering step is 5.
rule 0 permit Content of rule 0.
2 times matched
There have been two matches for the rule. The statistic counts
only ACL matches performed in software.
.This field is not displayed when no packets have matched the
rule.
Uncompleted
Applying the rule to hardware failed because no sufficient
resources were available or the hardware does not support
the rule. This event might occur when you modify a rule in an
ACL that has been applied.
rule 10 comment This rule is used in VPN rd. Comment about ACL rule 10.
display acl ipv6
Use display acl ipv6 to display configuration and match statistics for IPv6 basic, IPv6 advanced, and
simple ACLs.
Syntax
display acl ipv6 { acl6-number | all | name acl6-name } [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
acl6-number: Specifies an ACL by its number:
• 2000 to 2999 for IPv6 basic ACLs
• 3000 to 3999 for IPv6 advanced ACLs
• 10000 to 42767 for simple ACLs
all: Displays information for all IPv6 basic and IPv6 advanced ACLs.
name acl6-name: Specifies an ACL by its name. The acl6-name argument takes a case-insensitive string
of 1 to 63 characters. It must start with an English letter.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.