R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

144
undo cbs [ inbound | outbound ]
Views
FR class view
Default command level
2: System level
Parameters
inbound: Sets the CBS for the incoming packets. This argument is available when FR traffic policing is
enabled on interfaces.
outbound: Sets the CBS for the outgoing packets. This argument is available when FR traffic policing is
enabled on interfaces.
committed-burst-size: CBS in the range of 300 to 16000000 bits. The default value of CBS is 56000 bits.
Usage guidelines
If the packet direction is not specified, the CBS is effective for both incoming packets and outgoing
packets.
CBS is the traffic that an FR network is committed to send in an interval of Tc. If no congestion occurs, the
FR network guarantees the traffic of CBS is sent.
Examples
# Set CBS to 64000 bits for both incoming packets and outgoing packets of the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cbs 64000
Related commands
• ebs
• cir allow
• cir
cir
Use cir to set the Committed Information Rate (CIR) for FR PVCs.
Use undo cir to restore the default.
Syntax
cir committed-information-rate
undo cir
Views
FR class view
Default command level
2: System level
Parameters
committed-information-rate: Minimum CIR in the range of 1000 to 45000000 bps. The CIR is 56000
bps by default.