R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

154
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about PVC PQ on Serial 2/0.
<Sysname> display qos pvc-pq interface serial 2/0
Interface: Serial2/0
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (PVC-PQ queuing : Size/Length/Discards)
Top: 0/20/0 Middle: 0/40/0 Normal: 0/60/0 Bottom: 0/80/0
Table 48 Command output
Field Descri
p
tion
Interface FR interface.
Output queue : (Urgent queuing :
Size/Length/Discards)
Information about an output queue of urgent queuing:
• Number of packets in the queue.
• Length of the queue.
• Number of dropped packets in the queue.
Output queue : (PVC-PQ queuing:
Size/Length/Discards)
Information about an output queue of PVC PQ queuing:
• Number of packets in the queue.
• Length of the queue.
• Number of dropped packets in the queue.
Top Information about the output queue of the top queue.
Middle Information about the output queue of the middle queue.
Normal Information about the output queue of the normal queue.
Bottom Information about the output queue of the bottom queue.
ebs
Use ebs to set the EBS for the FR PVCs.
Use undo ebs to restore the default.
Syntax
ebs [ inbound | outbound ] excess-burst-size