R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

155
undo ebs [ inbound | outbound ]
Views
FR class view
Default command level
2: System level
Parameters
inbound: Sets the EBS for the incoming packets. This argument is available when FR traffic policing is
enabled on interfaces.
outbound: Sets the EBS for the outgoing packets. This argument is available when FR traffic policing is
enabled on interfaces.
excess-burst-size: EBS in the range of 0 to 16000000 bits. The default value of EBS is 0 bits.
Usage guidelines
EBS is the maximum amount of traffic, except CBS, that can be transmitted in the interval of Tc. When
congestion occurs to the network, the excess traffic is dropped preferentially.
If neither the inbound keyword nor the outbound keyword is specified for this command, the EBS is
effective for both incoming packets and outgoing packets.
Examples
# Set the EBS to 32000 bits for the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] ebs 32000
Related commands
• cbs
• cir allow
• cir
fifo queue-length
Use fifo queue-length to set the FIFO queue length for FR PVCs.
Use undo fifo queue-length to restore the default.
Syntax
fifo queue-length queue-length
undo fifo queue-length
Views
FR class view
Default command level
2: System level
Parameters
queue-length: FIFO queue length, which specifies the maximum number of packets that a FIFO queue
can hold. The value range for this argument is 1 to 1024, and the default is 40.