R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

158
undo fr de del list-number dlci dlci-number
Default
No DE rule list is applied to FR PVCs.
Views
FR interface (primary interface or subinterface) view, MFR interface view
Default command level
2: System level
Parameters
list-number: DE rule list number in the range of 1 to 10.
dlci-number: FR PVC number in the range of 16 to 1007.
Usage guidelines
Configured in primary interface view, this command applies a specific DE rule list only to the FR PVC of
the primary interface. Configured in subinterface view, this command applies a specific DE rule list only
to the subinterface.
With a DE rule list applied to an FR PVC, the DE flag bits of packets matching the DE rule list are set to
1.
Examples
# Apply DE rule list 3 to DLCI 100 of Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr dlci 100
[Sysname-Serial2/0] fr de del 3 dlci 100
Related commands
• fr del inbound-interface
• fr del protocol
fr del inbound-interface
Use fr del inbound-interface to configure an interface-based DE rule list. Before the incoming packets of
the specific interfaces are to be forwarded as FR packets, the DE flag bits of these packets are set to 1.
Use undo fr del inbound-interface to remove the specific DE rule from the DE rule list.
Syntax
fr del list-number inbound-interface interface-type interface-number
undo fr del list-number inbound-interface interface-type interface-number
Default
No DE rule list is created.
Views
System view
Default command level
2: System level