R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

160
less-than bytes: IP packets with the length less than the bytes argument. The value range for the bytes
argument is 0 to 65535.
tcp ports: IP packets with the source or destination TCP port number as the ports argument. The value
range for the ports argument is 0 to 65535. The ports argument can be either a port name or the
associated port number.
udp ports: IP packets with the source or destination UDP port number as the ports argument. The value
range for the ports argument is 0 to 65535. The ports argument can be either a port name or the
associated port number.
Usage guidelines
Execute this command multiple times to add new rules to a DE rule list. Up to 100 rules can be configured
for a DE rule list. Executed once, the undo fr del protocol ip command removes only one DE rule. To
remove a DE rule list, make sure that all the DE rules in the DE rule list are removed.
If you execute this command with no optional parameters specified, the DE rule list is created for all the
IP packets.
Examples
# Add a rule that sets the DE flag bits of all the FR packets encapsulated with IP packets to 1 to DE rule
list 1.
<Sysname> system-view
[Sysname] fr del 1 protocol ip
Related commands
• fr de del
• fr del inbound-interface
fr pvc-pq
Use fr pvc-pq to apply PVC PQ to the queues of an FR interface and set the length (which specifies the
maximum number of packets that a queue can hold) for each queue.
Use undo fr pvc-pq to restore the default queuing (FIFO queuing) for the queues of an FR interface.
Syntax
fr pvc-pq [ top-limit middle-limit normal-limit bottom-limit ]
undo fr pvc-pq
Default
An FR interface adopts FIFO queuing.
Views
FR interface view, MFR interface view
Default command level
2: System level
Parameters
high-limit: Top queue length in the number of packets, in the range of 1 to 1024. This argument is 20 by
default.
middle-limit: Middle queue length in the number of packets, in the range of 1 to 1024. This argument is
40 by default.