R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

162
Related commands
fr class
fr traffic-shaping
Use fr traffic-shaping to enable FRTS.
Use undo fr traffic-shaping to disable FRTS.
Syntax
fr traffic-shaping
undo fr traffic-shaping
Default
FRTS is disabled.
Views
FR interface view, MFR interface view
Default command level
2: System level
Usage guidelines
FRTS is applied to the outgoing interfaces and are usually applied to the DCE of an FR network.
Examples
# Enable FRTS on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr traffic-shaping
Related commands
• fr class
• fr-class
• fr dlci (Layer 2—WAN Command Reference)
fragment
Use fragment to enable the packet fragmentation function (conforming to frame relay forum's FRF.12) for
FR PVCs.
Use undo fragment to disable the packet fragmentation function.
Syntax
fragment [ fragment-size ] [ data-level | voice-level ]
undo fragment [ data-level | voice-level ]
Default
The packet fragmentation function is disabled for FR PVCs.
Views
FR class view