R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

164
Examples
# Associate the FR class test1 with an FR PVC with DLCI 200.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr dlci 200
[Sysname-fr-dlci-Serial2/0-200] fr-class test1
Related commands
• fr class
• fr dlci (Layer 2—WAN Command Reference)
pq
Use pq to apply PQ to the FR PVCs.
Use undo pq to restore the default queuing (FIFO queuing).
Syntax
pq pql pql-index
undo pq
Default
FR PVCs adopt FIFO queuing.
Views
FR class view
Default command level
2: System level
Parameters
pql-index: PQL index in the range of 1 to 16.
Examples
# Apply PQL 10 to the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] pq pql 10
Related commands
• cq
• wfq
• fr pvc-pq
pvc-pq
Use pvc-pq to assign packets from the FR PVC to a specific queue of PVC PQ.
Use undo pvc-pq to assign the packets from the FR PVC to the default queue of PVC PQ.
Syntax
pvc-pq { bottom | middle | normal | top }