R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

165
undo pvc-pq
Default
Packets from the FR PVC are assigned to the normal queue.
Views
FR class view
Default command level
2: System level
Parameters
bottom: Specifies the bottom queue.
middle: Specifies the middle queue.
normal: Specifies the normal queue.
top: Specifies the top queue.
Usage guidelines
PVC PQ queues include the top queue, the middle queue, the normal queue, and the bottom queue, in
descending priority order.
The packets of a given PVC can only be assigned to a specific queue.
Examples
# Assign packets from the PVCs associated with the FR class test1 to the top queue of PVC PQ.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] pvc-pq top
Related commands
fr pvc-pq
rtpq
Use rtpq to configure and apply RTPQ in a FR class.
Use undo rtpq to cancel the RTPQ configuration in a FR class.
Syntax
rtpq start-port min-dest-port end-port max-dest-port bandwidth bandwidth [ cbs committed-burst-size ]
undo rtpq
Views
FR class view
Default command level
2: System level
Parameters
start-port min-dest-port: Lower threshold for destination UDP port numbers, in the range of 2000 to
65535.