R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

12
reset acl counter
Use reset acl counter to clear statistics for one or all WLAN, IPv4 basic, IPv4 advanced, Ethernet frame
header, and user-defined ACLs.
Syntax
reset acl counter { acl-number | all | name acl-name }
Views
User view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number:
• 100 to 199 for WLAN ACLs
• 2000 to 2999 for IPv4 basic ACLs
• 3000 to 3999 for IPv4 advanced ACLs
• 4000 to 4999 for Ethernet frame header ACLs
• 5000 to 5999 for user-defined ACLs
The following matrix shows the ACL number ranges and hardware compatibility:
Hardware Number ran
g
es for ac
l
-numbe
r
MSR900 All ranges.
MSR93X All ranges except WLAN ACLs.
MSR20-1X All ranges.
MSR20 All ranges.
MSR30 All ranges.
MSR50 All ranges except that MPU-G2 does not support WLAN ACLs.
MSR1000 All ranges.
all: Clears statistics for all WLAN, IPv4 basic, IPv4 advanced, Ethernet frame header, and user-defined
ACLs.
name acl-name: Specifies an ACL by its name. The acl-name argument takes a case-insensitive string of
1 to 63 characters. It must start with an English letter.
Examples
# Clear statistics for IPv4 basic ACL 2001.
<Sysname> reset acl counter 2001
Related commands
display acl
reset acl ipv6 counter
Use reset acl ipv6 counter to clear statistics for one or all IPv6 basic and IPv6 advanced ACLs.