R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

36
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] step 2
Related commands
• display acl
• display acl ipv6
time-range
Use time-range to configure a time range. If you provide an existing time range name, the command
adds a statement to the time range.
Use undo time-range to delete a time range or a statement in the time range.
Syntax
time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] | from
time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-range-name [ start-time to end-time days [ from time1 date1 ] [ to time2 date2 ]
| from time1 date1 [ to time2 date2 ] | to time2 date2 ]
Default
No time range exists.
Views
System view
Default command level
2: System level
Parameters
time-range-name: Specifies a time range name. The name is a case-insensitive string of 1 to 32
characters. It must start with an English letter and to avoid confusion, it cannot be all.
start-time to end-time: Specifies a periodic statement. Both start-time and end-time are in hh:mm format
(24-hour clock). The value is in the range of 00:00 to 23:59 for the start time, and 00:00 to 24:00 for
the end time. The end time must be greater than the start time.
days: Specifies the day or days of the week (in words or digits) on which the periodic statement is valid.
If you specify multiple values, separate each value with a space, and make sure that they do not overlap.
These values can take one of the following forms:
• A digit in the range of 0 to 6, respectively, for Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, and Saturday.
• A day of a week in abbreviated words: sun, mon, tue, wed, thu, fri, and sat.
• working-day for Monday through Friday.
• off-day for Saturday and Sunday.
• daily for the whole week.
from time1 date1: Specifies the start time and date of an absolute statement. The time1 argument
specifies the time of the day in hh:mm format (24-hour clock). Its value is in the range of 00:00 to 23:59.
The date1 argument specifies a date in MM/DD/YYYY or YYYY/MM/DD format, where MM is the
month of the year in the range of 1 to 12, DD is the day of the month with the range depending on MM,