R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

52
Related commands
• gts
• qos policy
• traffic behavior
• classifier behavior
redirect
Use redirect to configure a traffic redirecting action in the traffic behavior.
Use undo redirect to delete the traffic redirecting action.
Syntax
redirect { cpu | interface interface-type interface-number }
undo redirect { cpu | interface interface-type interface-number }
Views
Traffic behavior view
Default command level
2: System level
Parameters
cpu: Redirects traffic to the CPU.
interface: Redirects traffic to an interface.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
The following matrix shows the command and router compatibility:
Command
MSR90
0
MSR93
X
MSR20-
1
X
MSR20 MSR30 MSR50
MSR100
0
redirect No No No
Yes (only the
cpu keyword
is supported)
Yes with only
MSR30-11E
and
MSR30-11F
routers and
MIM Layer 2
Ethernet
switching
modules
Yes with
only FIC
Layer 2
Ethernet
switching
modules
Yes
Examples
# Configure redirecting traffic to Ethernet 1/1 in traffic behavior database.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] redirect interface ethernet1/1