R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

Field Descri

tion

Queue Length Number of packets that the buffer queue can hold.

Queue Size Number of packets in the buffer.

Passed Number of packets/bytes permitted to pass through.

Discarded Number of packets/bytes dropped.

Delayed Number of packets/bytes delayed.

Nest Policy Child policy of the policy applied to the interface.

Traffic policy son1 The name of the child policy is son1.

qos apply policy (interface view, port group view, PVC view)

Use qos apply policy to apply a QoS policy.

Use undo qos apply policy to remove the QoS policy.

Syntax

qos apply policy policy-name { inbound | outbound }

undo qos apply policy [ policy-name ] { inbound | outbound }

Views

Interface view, port group view, PVC view

Default command level

2: System level

Parameters

inbound: Inbound direction.

outbound: Outbound direction.

policy-name: Specifies a policy name, a string of 1 to 31 characters.

Usage guidelines

All physical interfaces, except interfaces with X.25 or LAPB encapsulation enabled, can have QoS

policies applied.

To successfully apply a policy to an interface/PVC, make sure that the total bandwidth assigned to AF

and EF in the policy is smaller than the available bandwidth of the interface/PVC. If the available

bandwidth of the interface/PVC is modified to a value smaller than the total bandwidth for AF and EF,

the applied policy is removed. For a policy to be applied in the inbound direction, the referenced traffic

behaviors must not be configured with commands queue af, queue ef, queue wfq, and gts.

Settings in interface view take effect on the current interface. Settings in port group view take effect on all

ports in the port group. Settings in PVC view take effect on the current PVC.

Using this command on a VT interface makes the configuration effective on all the VA interfaces of the VT

interface.

Using this command on a WLAN-ESS interface makes the configuration effective on all the WLAN-DBSS

interfaces of the WLAN-ESS interface.

A policy must be applied to an interface/PVC following these rules: