R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

67
Policy-based traffic rate statistics collecting interval
commands
qos flow-interval
Use qos flow-interval to configure the QoS policy-based traffic rate statistics collecting interval for an
interface.
Use undo qos flow-interval to restore the default.
Syntax
qos flow-interval interval
undo qos flow-interval
Default
QoS policy-based traffic rate statistics collecting interval is 5 minutes on an interface.
Views
Interface view
Default command level
2: System level
Parameters
interval: QoS policy-based traffic rate statistics collecting interval (in minutes).
Usage guidelines
The traffic rate statistics collecting interval of an ATM PVC is the same as that of the ATM interface.
The traffic rate statistics collecting interval of an FR DLCI is the same as that of the FR interface.
The traffic rate statistics collecting interval of a subinterface is the same as that of the main interface.
You can use the display qos policy interface command to view the QoS policy-based traffic rate statistics
collecting interval setting and the collected statistics.
Examples
# Set the QoS policy-based traffic rate statistics collecting interval to 10 minutes on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] qos flow-interval 10