R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

71
Keyword MSR900
MSR93
X
MSR20-1X MSR20 MSR30 MSR50 MSR1000
dot11e-lp,
lp-dot11e,
and
lp-dot1p
Yes Yes
Yes with
WLAN-capabl
e models and
with WLAN
modules
Yes with
WLAN
modules
Yes with
WLAN
modules
Yes with
WLAN
modules
except for
routers
installed with
MPU-G2
Yes
dscp-lp No Yes No No
Yes with
only
MSR30-1
1E and
MSR30-1
1F routers
No Yes
The priority mapping table for traffic in both directions applies.
Examples
# Enter the 802.1p-to-local mapping table view.
<Sysname> system-view
[Sysname] qos map-table dot1p-lp
[Sysname-maptbl-dot1p-lp]
Related commands
display qos map-table
Port priority commands
qos priority
Use qos priority to change the port priority of an interface.
Use undo qos priority to restore the default.
Syntax
qos priority priority-value
undo qos priority
Default
The default port priority of an interface is 0.
Views
Interface view, port group view
Default command level
2: System level
Parameters
priority-value: Port priority value. The value range is 0 to 7, and the default is 0.