R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

82
Related commands
acl
Line rate commands
display qos lr interface
Use display qos lr interface to view the line rate configuration information and operational statistics on
a specified interface or all the interfaces.
Syntax
display qos lr interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays the line rate configuration information and operational
statistics on all the interfaces.
If a VT interface is specified, this command displays QoS line rate information of all VA interfaces
inheriting the VT interface, but does not display QoS information about the VT interface.
Examples
# Display the line rate configuration information and operational statistics on all the interfaces.
<Sysname> display qos lr interface
Interface: Ethernet1/1
Direction: Outbound
CIR 10 (kbps), CBS 1875 (byte), EBS 0 (byte)
Passed : 0(Packets) 0(Bytes)
Delayed: 0(Packets) 0(Bytes)
Active Shaping: NO
Direction: Inbound
CIR 10 (kbps), CBS 1875 (byte), EBS 0 (byte)
Passed : 0(Packets) 0(Bytes)