R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

83
Delayed: 0(Packets) 0(Bytes)
Active Shaping: NO
Table 27 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Direction Direction in which the line rate configuration is applied: inbound or outbound.
CIR CIR in kbps.
CBS CBS in bytes, which specifies the depth of the token bucket for holding bursty traffic.
EBS
Excessive burst size (EBS) in bytes, which specifies the traffic exceeding CBS when two
token buckets are used.
Passed Number and bytes of packets that have passed.
Delayed Number and bytes of delayed packets.
Active Shaping Whether the line rate configuration is activated.
qos lr
Use qos lr to limit the rate of incoming packets or outgoing packets on the interface.
Use undo qos lr to remove the rate limit.
Syntax
qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size [ ebs
excess-burst-size ] ]
undo qos lr { inbound | outbound }
Views
Interface view, port group view
Default command level
2: System level
Parameters
inbound: Limits the rate of incoming packets on the interface.
outbound: Limits the rate of outgoing packets on the interface.
cir committed-information-rate: Committed information rate (CIR) in kbps.
cbs committed-burst-size: Committed burst size (CBS) in bytes. The default CBS value is the traffic
transmitted at the rate of CIR in 500 ms.
ebs excess-burst-size: Excessive burst size (EBS) in bytes, which specifies the traffic exceeding CBS when
two token buckets are used. By default, the EBS is 0 and only one token bucket is used.
Usage guidelines
The following matrix shows the keyword and router compatibility: