R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

89
Use undo qos pql default-queue to restore the default.
Syntax
qos pql pql-index default-queue { bottom | middle | normal | top }
undo qos pql pql-index default-queue
Views
System view
Default command level
2: System level
Parameters
pql-index: PQ list index in the range of 1 to 16.
top, middle, normal, bottom: Corresponds to the four queues in PQ in descending priority order. The
default queue is the normal queue.
Usage guidelines
If this command is executed multiple times with the same pql-index argument, the new configuration
overrides the previous one.
Examples
# Assign packets matching no traffic match criterion in PQL 12 to the bottom queue.
<Sysname> system-view
[Sysname] qos pql 12 default-queue bottom
Related commands
• qos pql inbound-interface
• qos pql protocol
• qos pql queue
• qos pq
qos pql inbound-interface
Use qos pql inbound-interface to configure a match criterion for a PQ list to assign packets received from
a specified interface to a specified queue.
Use undo qos pql inbound-interface to delete the match criterion.
Syntax
qos pql pql-index inbound-interface interface-type interface-number queue { bottom | middle | normal
| top }
undo qos pql pql-index inbound-interface interface-type interface-number
Default
No match criterion is configured.
Views
System view