R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

90
Default command level
2: System level
Parameters
pql-index: PQ list index in the range of 1 to 16.
interface-type interface-number: Specifies an interface by its type and number.
top, middle, normal, bottom: Corresponds to the four queues in PQ in descending priority order.
Usage guidelines
You can execute this command multiple times with the same pql-index argument to create different match
criteria for packets received from different interfaces.
Examples
# Create a match criterion in PQ list 12 to assign packets received from Serial 2/0 to the middle queue.
<Sysname> system-view
[Sysname] qos pql 12 inbound-interface serial 2/0 queue middle
Related commands
• qos pql default-queue
• qos pql protocol
• qos pql queue
• qos pq
qos pql protocol
Use qos pql protocol to specify a queue for the IP packets that match a certain match criterion.
Use undo qos pql protocol to delete the match criterion.
Syntax
qos pql pql-index protocol ip [ queue-key key-value ] queue { bottom | middle | normal | top }
undo qos pql pql-index protocol ip [ queue-key key-value ]
Default
No match criterion is configured.
Views
System view
Default command level
2: System level
Parameters
pql-index: PQ list index in the range of 1 to 16.
top, middle, normal, bottom: Corresponds to the four queues in PQ in descending priority order.
ip [ queue-key key-value ]: Classifies and enqueues IP packets. If neither the queue-key argument nor the
key-value argument is specified, all IP packets are enqueued.