R2511-HP MSR Router Series ACL and QoS Command Reference(V5)

Default command level

2: System level

Parameters

pql-index: PQL index in the range of 1 to 16.

queue-length: Queue length for the specified queue, in the range of 1 to 1024.

• 20 for the top queue

• 40 for the middle queue

• 60 for the normal queue

• 80 for the bottom queue

Usage guidelines

If a queue is full, all subsequent packets to this queue are dropped.

Examples

# Set the length of the top queue in PQL 10 to 10.

<Sysname> system-view

[Sysname] qos pql 10 queue top queue-length 10

Related commands

• qos pql default-queue

• qos pql inbound-interface

• qos pql protocol

• qos pq

CQ commands

display qos cq interface

Use display qos cq interface to view the custom queuing (CQ) configuration and statistics of an

interface/PVC or all the interfaces/PVCs.

Syntax

display qos cq interface [ interface-type interface-number [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ] [ |

{ begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

interface-type interface-number: Specifies an interface by its type and number.

pvc { pvc-name [ vpi/vci ] | vpi/vci }: Specifies a PVC on an ATM interface. pvc-name specifies the PVC

by its name. vpi/vci specifies the PVC by its VPI/VCI pair. This option is only available for ATM

interfaces.