R2511-HP MSR Router Series ACL and QoS Configuration Guide(V5)

5
1. Combining all periodic statements.
2. Combining all absolute statements.
3. Taking the intersection of the two statement sets as the active period of the time range.
To configure a time range:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure a time
range.
time-range time-range-name
{ start-time to end-time days [ from
time1 date1 ] [ to time2 date2 ] |
from time1 date1 [ to time2 date2 ]
| to time2 date2 }
By default, no time range exists.
Repeat this command with the same time
range name to create multiple statements for
a time range.
Configuring a WLAN ACL
The following matrix shows the WLAN ACL and hardware compatibility:
Hardware WLAN ACL
MSR900 Yes
MSR93X No
MSR20-1X Yes
MSR20 Yes
MSR30 Yes
MSR50 Yes (except MPU-G2)
MSR1000 Yes
WLAN ACLs match packets from WLAN clients based on SSIDs of WLANs.
To configure a WLAN ACL:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a WLAN ACL and
enter its view.
acl number acl-number
By default, no ACL exists.
WLAN ACLs are numbered in the
range of 100 to 199.
3. Configure a description for
the WLAN ACL.
description text
Optional.
By default, a WLAN ACL has no
ACL description.
4. Set the rule numbering step.
step step-value
Optional.
The default setting is 5.
5. Create or edit a rule.
rule [ rule-id ] { deny | permit }
[ ssid ssid-name ]
By default, a WLAN ACL does not
include any rule.