R2511-HP MSR Router Series ACL and QoS Configuration Guide(V5)

116
Displaying and maintaining FR QoS
Task Command Remarks
Display the mapping relationship
between FR classes and interfaces
(including the DLCIs of an
interface, subinterfaces of an
interface, and the DLCIs of
subinterfaces).
display fr class-map { fr-class class-name |
interface interface-type interface-number } [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display the configuration and
statistics information about FR
QoS.
display fr pvc-info [ interface interface-type
interface-number ] [ dlci-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display the information about all
the configured FR switching PVCs.
display fr switch-table { all | name switch-name |
interface interface-type interface-number } [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display the information about CBQ
applied to an interface.
display qos policy interface [ interface-type
interface-number [ dlci dlci-number ] | inbound |
outbound ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display the information about PVC
PQ on an FR interface.
display qos pvc-pq interface [ interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display the information about FR
fragmentation.
display fr fragment-info [ interface interface-type
interface-number ] [ dlci-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display the statistics information
about data transmitted and
received through FR.
display fr statistics [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
FR QoS configuration examples
FRTS configuration example
Network requirements
As shown in Figure 48, the router connects to the FR network through Serial 2/0. Its average transmit rate
is 96 kbps, maximum transmit rate is 128 kbps, and minimum transmit rate is 32 kbps. Configure FRTS
on the router to adjust 20% of the BECN-flagged traffic every time.
Configure PQ to make sure that the IP packets sourced from the 10.0.0.0 network segment are
transmitted preferentially.
Figure 48 Network diagram