R2511-HP MSR Router Series ACL and QoS Configuration Guide(V5)

40
Ste
p
Command Remarks
2. Enter interface view or
port group view.
• Enter interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual port-group-name
Use one of the commands.
Settings in interface view take
effect on the current interface.
Settings in port group view take
effect on all ports in the port group.
3. Configure GTS on the
interface or port
group.
qos gts any cir committed-information-rate
[ cbs committed-burst-size [ ebs
excess-burst-size [ queue-length
queue-length ] ] ]
N/A
Configuring the rate limit
The rate limit of a physical interface specifies the maximum rate of incoming packets or outgoing packets.
To configure the rate limit:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view or
port group view.
• Enter interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual port-group-name
Use one of the commands.
Settings in interface view take effect
on the current interface. Settings in
port group view take effect on all
ports in the port group.
3. Configure the rate limit
for the interface or port
group.
qos lr { inbound | outbound } cir
committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ]
N/A
Displaying and maintaining traffic policing, GTS,
and rate limit
Task Command Remarks
Display CAR list information.
display qos carl [ carl-index ] [ | { begin | exclude
| include } regular-expression ]
Available in any
view.
Display the CAR information on the
specified interface.
display qos car interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display interface GTS
configuration information.
display qos gts interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display interface rate limit
configuration information.
display qos lr interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.