R2511-HP MSR Router Series ACL and QoS Configuration Guide(V5)
58
3. Configure match
criteria.
if-match [ not ] match-criteria
N/A
Defining a traffic behavior
To define a traffic behavior, create the traffic behavior first and then configure QoS attributes in traffic
behavior view.
Configure AF and the minimum guaranteed bandwidth
When you configure AF and the minimum guaranteed bandwidth, follow these guidelines:
• You can apply this traffic behavior only to the outgoing traffic of an interface or ATM PVC.
• You cannot configure the queue ef command together with the queue af command in the same
traffic behavior.
• To reference both the queue ef command and the queue af command in a policy, you must
configure them in the same unit (either bandwidth or percentage). If not, your referencing attempts
will fail.
To configure AF and the minimum guaranteed bandwidth:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Create a traffic behavior and
enter traffic behavior view.
traffic behavior behavior-name
The specified behavior name
cannot be the name of any
system-defined behavior.
3. Configure AF and the
minimum guaranteed
bandwidth.
queue af bandwidth { bandwidth |
pct percentage }
N/A
Configuring EF and the maximum bandwidth
When you configure EF and the maximum bandwidth, follow these guidelines:
• You cannot configure the queue ef command together with the any of the commands queue af,
queue-length, and wred for a traffic behavior.
• The default class cannot be associated with a traffic behavior including EF.
• To reference both the queue ef command and the queue af command in a policy, you must
configure them in the same unit (either bandwidth or percentage). If not, your referencing attempts
will fail.
To configure EF and the maximum bandwidth:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Create a traffic behavior and
enter traffic behavior view.
traffic behavior behavior-name
The specified traffic behavior name
cannot be the name of any
system-defined behavior.
3. Configure EF and the
maximum bandwidth.
queue ef bandwidth { bandwidth
[ cbs burst ] | pct percentage
[ cbs-ratio ratio] }
N/A