R2511-HP MSR Router Series Fundamentals Command Reference(V5)

101
Enter y at the prompt. If you have used the terminal logging command to enable the log display function
(enabled by default) on the terminal, the system automatically displays a reboot schedule log message.
<Sysname>
%Jun 6 11:43:11:629 2006 Sysname CMD/4/REBOOT:
vty0(192.168.1.54): Set schedule reboot parameters at 11:43:11 06/06/2006, and system will
reboot at 12:00 06/06/2006.
Related commands
schedule reboot delay
schedule reboot delay
Use schedule reboot delay to schedule a device reboot to occur after a delay.
Use undo schedule reboot to disable the scheduled reboot function.
Syntax
schedule reboot delay { hh:mm | mm }
undo schedule reboot
Default
The scheduled reboot function is disabled.
Views
User view
Default command level
3: Manage level
Parameters
hh:mm: Specifies a delay for the device reboot, in the hh:mm format. The hh value is in the range of 0
to 720, and the mm value is in the range of 0 to 59. When the hh value is 720, the mm value cannot be
more than 0.
mm: Specifies a delay for the device reboot in minutes, in the range of 0 to 43200.
Usage guidelines
CAUTION:
• Device reboot can interrupt network services.
• Changing any clock setting can cancel the reboot schedule.
The reboot delay cannot exceed 30 x 24 x 60 minutes, or 30 days.
The device supports only one device reboot schedule. If you configure the schedule reboot delay
command multiple times, the most recent configuration takes effect. The schedule reboot at command
and the schedule reboot delay command overwrite each other, and whichever is configured most
recently takes effect.
The alert "REBOOT IN ONE MINUTE" appears one minute before the reboot time.
For data security, if you are performing file operations at the reboot time, the system does not reboot.