R2511-HP MSR Router Series Fundamentals Command Reference(V5)

104
Views
System view
Default command level
3: Manage level
Parameters
maintain: Specifies that when the system detects any software abnormality, it maintains the current
situation, and does not take any measure to recover itself.
reboot: Specifies that when the system detects any software abnormality, it recovers itself through
automatic reboot.
Examples
# Set the exception handling method to reboot.
<Sysname> system-view
[Sysname] system-failure reboot
temperature-limit
Use temperature-limit to set the temperature alarm thresholds for a card.
Use undo temperature-limit to restore the default.
Syntax
temperature-limit slot-number lower-value upper-value
undo temperature-limit slot-number
Default
The temperature alarm thresholds depend on device models.
Views
System view
Default command level
2: System level
Parameters
slot-number: This argument does not take effect.
lower-value: Lower temperature threshold in Celsius degrees. .
upper-value: Upper temperature threshold in Celsius degrees.
The upper-value argument must be larger than the lower-value argument.
Usage guidelines
The following matrix shows the command and router compatibility: