R2511-HP MSR Router Series Fundamentals Command Reference(V5)

109
[Sysname-job-saveconfig] view monitor
[Sysname-job-saveconfig] time 1 repeating delay 5 command save a.cfg
Related commands
• job
• view
transceiver phony-alarm-disable
Use transceiver phony-alarm-disable to disable alarm traps for transceiver modules.
Use undo transceiver phony-alarm-disable to restore the default.
Syntax
transceiver phony-alarm-disable
undo transceiver phony-alarm-disable
Default
Alarm traps are enabled for transceiver modules.
Views
System view
Default command level
3: Manage level
Usage guidelines
If you install a transceiver module whose vendor name is not HP, the system repeatedly outputs traps and
logs to notify you to replace the module. To continue to use such a transceiver module that is
manufactured or customized by HP but has no vendor information, you can disable alarm traps so that
the system stops outputting alarm traps.
Examples
# Disable alarm traps for transceiver modules.
<Sysname> system-view
[Sysname] transceiver phony-alarm-disable
usb disable
Use usb disable to disable the USB ports.
Use undo usb disable to enable the USB ports.
Syntax
usb disable
undo usb disable
Default
The USB ports are enabled.
Views
System view