R2511-HP MSR Router Series Fundamentals Command Reference(V5)

110
Default command level
3: Manage level
Usage guidelines
Before you executing this command, make sure the USB ports are not being used for data read/write
operation. Otherwise, the operation might fail.
Disabling the USB ports also disables the USB-based storage and 3G functions.
Examples
# Disable the USB ports.
<sysname> system-view
[Sysname] usb disable
view
Use view to specify a view for a job.
Use undo view to remove the view of a job.
Syntax
view view-name
undo view
Default
No view is specified for a job.
Views
Job view
Default command level
3: Manage level
Parameters
view-name: Specifies a view in which commands in the job run. A view name is a string of 1 to 90
characters.
Usage guidelines
Every job can have only one view. If you specify multiple views, the most recent configuration takes effect.
Enter a view name in its complete form and make sure the view name is available on the device. Most
commonly used view names include monitor for user view, system for system view, Ethernet
x/x for
Ethernet interface view, and Vlan-interface
x for VLAN interface view.
Examples
# Specify system view for the job creatvlan.
<Sysname> system-view
[Sysname] job creatvlan
[Sysname-job-creatvlan] view system
Related commands
• job
• time